welcome,guest
Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2017-12-24 01:02
136
Company Profile
Chengdu Guorong Technolgy Co., LtdBy certification [File Integrity]
Contact: forthwill(Mr.)
Telephone:
Area: Beijing
Address: Beijing
Website: http://forthwill.yinchangsh.com/
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
unit price:Negotiable
Installation manual | ||||||||
1. You will need to drill a clearance hole in the ABS brackets at the appropriate recessed ports | ||||||||
Place the panel mounts on a flat surface, then position the panels onto the mounts Drill a pilothole through mount directly into panel frame when drilling the holes in the solar panel frame toattach the bracket try and drill the hole more towards the center of the panel frame to avoid anydamage to the solar panel glass and cells | ||||||||
2. Attach the brackets to the solar panel frame using a self-tapping stainless steel orgalvanized screws | ||||||||
3. Mark the mounting location for the panels on the surface to which the panels will be mounted | ||||||||
4. After applying the Sikaflex-715 to your brackets install them to your pre marked position onyour roof Ensure you have the panel orientated so the wires/cables coming out the back are on the correct side Following the Sikaflex-715 installation instructions that come with the Sikaflexproduct, lightly press down over the top of each bracket to ensure the Sikaflex-715 makes a goodcontact with all surfaces | ||||||||
5. Refer to the Sikaflex instructions and allow the required time for the Sikaflex-715to completely dry before connecting the wires/cables | ||||||||
Helpful tips: To help reduce the wires flapping on the roof while you are travelling putsome Sikaflex-715 on the wires in various places and adhere them to the roof | ||||||||
6. While you are waiting for the Sikaflex-715 to dry, install your PV charge controller in the permanent position you have previously chosen Recommended the PV charge controllershould be installed in a dry, sheltered location away from sources of high temperature and moistureshould be installed in a dry, sheltered location away from sources of high temperature and moisture | ||||||||
Should be installed in a dry, sheltered location away from sources of high temperature and moisture | ||||||||
Please note: this instructions are a simple guide for the installation of the U-MO-ABS series | ||||||||
Plastic panel mounts Most important you follow the Sikaflex715 (or other manufacturer) | ||||||||
Instructions to ensure the panels are mounted safe and secure |